Troubleshooting Low Flame Issues with Your Tripod Torch Regulator
Share
When using your Tripod Torch, you may occasionally encounter issues with a low flame output. This can often be due to a safety trip in the regulator rather than a defective part or lack of propane. Regulators are designed a safety feature to prevent excessive gas flow, but this features can sometimes restrict gas flow unexpectedly. Here’s a step-by-step guide to troubleshoot and resolve the issue.
Step-by-Step Troubleshooting:
-
Close the Propane Tank Valve
- Fully close the valve on your propane tank to stop gas flow.
-
Turn the Regulator OFF
- Rotate the regulator knob counterclockwise until it’s completely OFF.
-
Disconnect the Hose from the Propane Tank
- Unscrew the hose from the propane tank to ensure no connection.
-
Reconnect the Hose to the Propane Tank
- With the tank valve still closed, securely reconnect the hose to the propane tank.
-
Open the Propane Tank Valve
- Open the propane tank valve fully to ensure proper gas flow.
-
Follow the Lighting Process
- Light your Tripod Torch as per the instructions provided in your manual.
These steps effectively reset the regulator, which can help restore normal flame output.
Additional Factors to Consider:
- Propane Tank Fill Level: A low propane level can result in insufficient pressure, leading to a weaker flame. Ensure your tank is filled.
- Propane Tank Type: These steps are designed for standard 3-20lb propane tanks. If you’re using a different tank or onboard RV propane system, ensure compatibility.
When to Replace the Regulator:
If the steps above don’t resolve the issue, the regulator may be defective. Contact us and we’ll be sure to take care of you.
Final Notes:
Regulator safety trips are a common occurrence with high-pressure propane systems like the Tripod Torch. While it can be frustrating, these built-in features are there to protect you. A quick reset often solves the problem, ensuring you can enjoy the incredible heat and portability your Tripod Torch is designed to deliver.
If you continue to experience issues, don’t hesitate to reach out. We’re here to help!